BP3KN1-3B
12
IB BP3KN1-3B V4920 EN
EN
all 3 measurements are taken.
•
Do not remove the cuff between measurements.
•
If one of the individual measurements was questionable, an additional measurement is
automatically taken.
4.3. Selecting Heart Level Indicator
Keeping the wrist at the same height level as heart during measurement is one of the most
important facts to use a wrist blood pressure monitor. Incorrect wrist position might lead to
an inaccurate result. Follow the instruction of the Heart Level Indicator to make sure the wrist
height is the same level as heart.
•
After the MAM mode is selected, the Heart Level Indicator ON/OFF selection will appear
on the display. Press the M-button to select ON or OFF the Heart Level Indicator. Press
the Time Button to confirm and then enter the date and time setting.
•
There are 5 levels of height detection plus a blue LED indicator to help the user
determine if the monitor is at the correct height.
•
When the monitor is at higher position relative to your heart, 1 or 2 downward arrow(s)
appear to remind you to lower the wrist slowly until the blue LED is lighted with a heart
symbol. Conversely, 1 or 2 upward arrow(s) appear when your wrist height is lower to
heart level and raise the wrist higher as indication.
•
Adjust your wrist to correct height level and keep about 2 sec, the monitor will start
measurement automatically.
•
Please retain this wrist height during measurement, and do not move even in the interval
time of MAM mode until the result displayed on the LCD.
•
The blue LED will blank off during measurement to save the battery power and appear
again with the result when the measurement is finished.
•
If the user doesn’t adjust the wrist at correct heart level in time (about 9 sec), the monitor
will still start measurement with upward/downward arrows as an indication. However, we
recommend to repeat the measurement to make sure getting an accurate result.
4.4. Setting the date and time
•
After selecting the Heart Level Indicator, the year number flashes in the display. You can
set the year by pressing the M-button. To confirm and then set the month, press the time
button.
•
Press the M-button to set the month. Press the time button to confirm and then set the
day.
•
Follow the instructions above to set the day, hour and minutes.
•
Once you have set the minutes and pressed the time button, the date and time are set
and the time is displayed.