13
(see chapter 2 on page 8) in order to rule out that the
arrhythmia detected is dangerous atrial fibrillation
(A-fib). Only in the multiple-measurement mode can
the monitor collect sufficient data to reliably detect
atrial fibrillation (see chapter 1 on page 6).
5. Data memory
This device automatically stores the last 99 mea-
surement values of the user.
Viewing the stored values
Press the M button
3
briefly while the monitor is
switched off. Now the display changes over to the
data memory display, indicated by «M»
15
(M» =
Memory). First, the average value of all measure-
ments stored in the memory is shown, as indicated
by the «A» to the right of the value («A» = Average).
Pressing the M button again displays the last value
measured. Pressing the M button repeatedly al-
lows you to move from one stored value to another
(from the latest to the oldest entry in the memory).
Blood pressure readings with the cuff position
and pressure being less than optimal
16
-B are
not included in the average.
Ensure that the maximum memory capacity of
99 values is not exceeded. When the memory
is full, the oldest value is automatically over-
written with the 100th value. Therefore, the
readings should be evaluated by a doctor or
documented in a blood pressure diary before
the full memory capacity is reached - other-
wise the data will be lost.
Clearing all values
If you are sure that you want to permanently re-
move all stored values, hold down the M button
(the monitor must have been switched off before-
hand) until «CL ALL» («CL ALL» = Clear All) appears
and then release the button. To permanently clear
the memory, press the MAM & time button while
«CL ALL» is flashing.
Aborting the deletion:
To abort the deletion, simply press the On/off
button
1
again while «CL ALL» is flashing.
It is not possible to delete individual readings.
6. Battery level indicator
and battery change
Batteries almost flat
When the battery power is approximately ¾ down,
the battery symbol
17
will flash as soon as the
monitor is switched on. Although the monitor will
continue to measure reliably, you should obtain
replacement batteries promptly. Batteries flat -
replacement
