25
6.3. Stop printing
If you would like to stop printing, click the
PRINTER button during the printing process.
NOTE:
Further details regarding the printer can be found
in the printer instruction manual.
7. Error
messages/malfunctions
If an error occurs during a measurement, the mea-
surement is discontinued and a corresponding error
code is displayed (Example: Error No. 2).
Error No. Possible cause(s)
ERR 1
No pulse has been detected.
ERR 2
Unnatural pressure impulses influence the measurement
result. Reason: The arm was moved during the
Measurement (Artefact).
ERR 3
The inflation of the cuff takes too long. The cuff is not
correctly seated.
ERR 5
The measured readings indicated an unacceptable dif-
ference between systolic and diastolic pressures. Take
another reading following directions carefully. Contact
you doctor if you continue to get unusual readings.
ERR 6
Single data differ too much during Average Mode even
after 4 cycles. No average result can be displayed.
IB BP 3BU1-5 VarB 0702.qxd 13.08.2002 8:41 Uhr Seite 25
