© Microhard Systems Inc.
37
4.0 Configuration
4.1.3 System > Services
Certain services in the pX2 can be disabled or enabled for either security considerations or resource/power
considerations. The Enable/Disable options are applied after a reboot and will take affect after each start
up. The Start/Restart/Stop functions only apply to the current session and will not be retained after a power
cycle.
Image 4-1-4: System > Services
SSH
Using the SSH Service Enable/Disable function, you can disable the
SSH service (Port 22) from running on the pX2. The port used by the
SSH service can also be modified. The default is 22.
22
Values (port)
Telnet
Using the Telnet Service Enable/Disable function, you can disable the
Telnet service from running on the pX2. The port used by the Telnet
service can also be modified. The default is 23.
23
Values (port)
Web UI
The default web server port for the web based configuration tools used
in the modem is port 80 (http) and port 443 (HTTPS).
Change as required, but keep in mind that if a non standard port is
used, it must be specified in a internet browser to access the unit.
(example: http://192.168.168.1:8080).
Values
(selection)
HTTP/HTTPS
HTTP
HTTPS
FTP
The FTP service can be enabled/disabled using the Services Status
Menu. The FTP service is used for firmware recovery operations.
Enable
/ Disable
Values (port)
Microhard Sh is reserved for internal use.
