© Microhard Systems Inc.
160
5.0 AT Command Line Interface
5.1 AT Command Overview
AT Commands can be issued to configure and manage the BulletPlus, via the back serial port (Console),
or by TCP/IP (telnet).
5.1.1 Serial Port
To connect and access the AT Command interface on the BulletPlus, a physical connection must be made
on the Console (TX/RX) serial port on the back of the BulletPlus A terminal emulation program
(Hyperterminal, Tera Term, ProComm, Putty etc) can then be used to communicate with the BulletPlus.
The port settings of this port can be modified by changing the settings of the Console Port, in the Serial
Image 5-1: Console Port Settings
Default Settings:
Baud rate:
115200
Data bits:
8
Parity:
None
Stop Bits:
1
Flow Control:
None
Once communication is established, a login is required to access the AT Command interface, once logged
in, the AT Command Line Interface menu is displayed. Type “?” or Help to list the menu commands.
Default Settings:
BulletPlus login:
admin
Password:
admin
Image 5-2: AT Command Window