micro
HAM ©
2006
All rights reserved
CW from Keyboard
Type ahead
– enables type ahead when using a PS/2 keyboard. Characters are
transmitted after a
space
(word mode). or when the buffer has reached its limit
(16 characters).
QWERTZ layout
– changes keyboard to European QWERTZ layout.
Auto Numbering
Leading zero as T
– sends leading zeros in contest report as T. For example 001
will be send as TT1.
Zero as T
– sends all "zeros" in contest report as T. For example number 100 will be
send as 1TT.
One as A
– sends all "ones" in contest report as A. For example number 101 will be
send as A0A.
Nine as N
– sends all "nines" in contest report as N. For example number 199 will be
send as 1NN.
Report 5NN
– send 5NN before contest serial number.
Other message functions can be controlled by an external PS2 keyboard or keypad.
See: External Keyboard.
CW MESSAGES TAB
On this tab you can define nine messages of up to 50 characters each which are stored in MK2R non-
volatile memory. Each memory may have a programmable repeat delay and/or call another memory.
Commands which may be included in a memory are:
Set PTT:
close WinKey PTT.
Clear PTT:
release WinKey PTT.
Merge:
merge two characters without a letter space – [M]AS will sound AS
.-...
Set WPM:
force speed to the selected value regardless of position of speed knob.
Cancel WPM:
restore speed set by the Speed pot.
Set Key:
close CW output for selected time in seconds.
Set Wait:
wait selected seconds during playback.
Jump to:
used for looping a message or calling another message
Delay:
sets the delay in seconds before looping or calling another message
Test:
plays a message without storing it
Store:
saves one message to MK2R memory
Store All:
saves all messages to MK2R memory
Load from File:
loads all messages from file
Save to File:
saves all messages to file
Messages can also be saved and replayed using an external keyboard or numeric keypad attached to the
PS/2
jack. See: External Keyboard.
52
