micro
HAM ©
2006
All rights reserved
Installing the USB DRIVER
Connect one end of the USB cable to the MK2R or
MK2R+ and plug the other end into an open USB
port in your computer.
The automatic Wizard will appear, insert the
installation CD into the CDROM drive. Select "No,
not this time" when asked to connect to Windows
Update, then click "Next."
Now, select "Install from list or specific location
(Advanced)" and click "Next."
When asked for your search and installation options
use the path to the Router installation directory. The
default path is:
C:\Program Files\microHAM\drivers\d2xx
Wait until the driver is copied.
During installation on Windows XP a driver certification dialog will appear. Ignore this message and click
"Continue Anyway".
If the USB driver is successfully installed, a "microHAM USB Device" should appear in the Universal Serial
Bus controllers section of Windows Device Manager without any exclamation mark.
18
