5
For installations where the DMX cable has to run a long distance, or is in an electrically noisy environment, it is recommended to
use a DMX terminator. This helps in preventing corruption of the digital control signal by electrical noise. The DMX terminator is
simply an XLR plug with a 120
Ω
resistor connected between pins 2 and 3,which is then plugged into the output XLR socket of the
last fixture in the chain. Please see illustrations below.
6. MENU NAVIGATION
MODE FUNCTIONS
‘Audi’: Sound
Control
‘Auto’: Auto-run
Control
‘dxxx’:
DMX512 Control (The ‘xxx’ is the address code. Press UP or DOWN to set the address)
‘SLAV’: Slave Control (The slave unit will do the same effect as master unit.)
‘XXXX’: Total running time. (This mode displays the total fixture hours that the unit has been in operation.)
1
2
3
PIN 3
PIN 2
120
Ω
