4
Regardless of the rigging option you choose for your MICROH TITAN RGB 1.5 wash fixture, always be sure to secure your fixture
with a safety cable. The fixture provides a built-in rigging point for a safety cable on the hanging bracket as illustrated above. Be
sure to only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle. Please see
picture below.
5. DMX-512 CONTROL CONNECTIONS
This fixture complies with international USITT DMX standards and can be used with either a 3 pin or 5 pin DMX connector. Plug in
the provided 3 pin XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the
MICROH TITAN RGB 1.5. To connect the units to DMX, you must daisy chain the fixtures together as referred in the diagram below.
Always end your DMX-512 connection with a DMX terminator.
