12
LENS REPLACMENT
- The MICROH RAZOR 45 comes with lens pre-installed at the factory. However, interchangeable
lens system gives you options to change lens of different beam angle. Please follow the below instructions for proper
replacement/installation.
1. Remove all 8 screws from side metal cover.
2. Remove plastic front cover by sliding it out.
3. Remove all 10 screws that hold the lens kit in place and take out the complete lens kit.
4. Replace lens kit and follow reverse steps to close the fixture.
IMPORTANT!!! When replacing the lens assembly, please make sure that the power is disconnected
from the fixture beforehand. LEDs on PCBs are sensitive to ESD (electrostatic discharge). Take
precautions to avoid ESD damage during service.
9. TECHNICAL SPECIFICATIONS
MODEL:
LED RAZOR45
LAMP:
45 x 1.2W Edison LEDs (9 Red, 9 Green, 9 Blue, 9 White Edison LEDs)
VOLTAGE:
120VAC 60Hz 114W 0.95A
FUSE:
2A /120VAC
DIMENSIONS:
21.1” x 6” x 8.8” / 511 x 152 x 224 mm
BOX DIMENSIONS:
24.09” x 11.34” x 8.58” / 612 x 288 x 218 mm
NET WEIGHT:
12.55 lbs / 7.3 kgs
GROSS WEIGHT:
16.1 lbs / 11kgs
WARRANTY:
2 Year Limited Warranty
