Microframe Corporation 3500 series Operating Manual Download Page 3

Limited Warranty Agreement

Your Microframe System is warranted 

against failure due to defects in workmanship 
or material for a period of one (1) year from 
the date of purchase. Microframe Corporation 
will repair or replace any defective unit. Obvi-
ous abuse or mishandling of the unit is NOT 
covered by this warranty.

Merchandise Return

If your Unit does not work satisfactorily, 

please give us a call. We may be able to solve 
the problem by phone. If it becomes necessary to 
return your Unit to the factory, please observe 
the following:

1. Place Unit in a sturdy box with suffi cient 

packing material.

2. If requested, include the power adapter.
3. Return the system insured and prepaid 

since we are not responsible for shipping dam-
ages and losses on returned Units.

Warranty Service

For warranty service, please contact Mi-

croframe at 1-800-635-3811.  A tech will gladly 
assist you. 

Assistance

For any product assistance or maintenance 

help, contact Microframe by either calling 
1-800-635-3811 or emailing us at:   support@
microframecorp.com.

Warranty Exclusion

Do not install substitute parts or perform 

any modifi cation to the product without fi rst 
contacting Microframe.

Warning

All power adapters, line cords, and electrical 

equipment should be kept out of the reach of 
children and away from water.

Life Support Policy

Microframe's products are not authorized 

for use as components in life support devices 
or systems without the express written ap-
proval of the president of Microframe Corpo-
ration. 

As used herein:

1. Life support devices or systems are defi ned 

as systems which support or sustain life, and 
whose failure to perform when properly used in 
accordance with instructions for use provided 
in the labeling, can be reasonably expected 
to result in a signifi cant injury to the user or 
anyone depending on the system.

2. A critical component is any component of 

a life support device or system whose failure to 
perform can be reasonably expected to cause 
the failure of the life support device or system, 
or to affect its safety or effectiveness.

Disclaimer

We are constantly striving to improve our 

products. Due to this, specifi cations are subject 
to change without notice.

Microframe Corporation      
604 S. 12th Street
Broken Arrow, OK  74012
1-800-635-3811

Nomenclature

In this manual, use this nomenclature to 

distinguish between buttons, functions, mes-
sages, and things:

"

SEND

"     = is a button that is pressed

"

ENTER

"   = is a button that is pressed

"

CANCEL

"   = is a button that is pressed

  send      

= a verb used in text

  enter     

= a verb used in text

"

ON

"       

= turn something "ON" or 

"

OFF

"     

= turn something "OFF"

Pager(s)

 

= noun or object

Display(s)

  = noun or object

Summary of Contents for 3500 series






















Reviews: