background image

Limited Warranty

Microfl ex,  LLC  warrants  this  unit  against  defects  in  materials  and  workmanship  for  a 

period of one year from the date of shipment.  Microfl ex, LLC will, at its option, repair or 

replace equipment that proves to be defective during the warranty period.  This warranty 

includes parts and labor.

A  Return  Materials  Authorization  (RMA)  number  must  be  obtained  from  the  factory 

and clearly marked on the outside of the package before equipment will be accepted for 

warranty work.

Microfl ex, LLC believes that the information in this manual is accurate.  In the event that 

a typographical or technical error exist, Microfl ex, LLC reserves the right to make changes 

without prior notice to holders of this edition.  The reader should consult Microfl ex, LLC 

if any errors are suspected.  In no event should Microfl ex, LLC be liable for any damages 

arising out of or related to this document or the information contained in it.

EXCEPT AS SPECIFIED HEREIN, MICROFLEX, LLC MAKES NO WARRANTIES OR 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  CUSTOMER’S 

RIGHT TO RECOVER DAMAGES CAUSED BY FAULT OR NEGLIGENCE ON THE 

PART  OF  MICROFLEX  SHALL  BE  LIMITED TO THE AMOUNT THERETOFORE 

PAID  BY  THE  CUSTOMER.    MICROFLEX,  LLC  WILL  NOT  BE  LIABLE  FOR 

DAMAGES  RESULTING  FROM  LOSS  OF  DATA,  PROFITS,  USE  OF  PRODUCTS, 

OR INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE 

POSSIBILITIES THEREOF.  This limitation of the liability of Microfl ex, LLC will apply 

regardless of the form of action, whether in contract or tort, including negligence.  Any 

action against Microfl ex, LLC must be brought within one year after the cause of action 

accrues.  The warranty provided herein does not cover damages, defects, malfunctions, or 

service failures caused by owners failure to follow Microfl ex, LLC’s installation, operation, 

or maintenance instructions; owners modifi cation of the product; owner’s abuse, misuse, or 

negligent acts; and power failure or surges, fi re, fl ood, accident, actions of third parties, or 

other events outside reasonable control.

Micro

fl

 ex, LLC

35900 Royal Road
Pattison, Texas 77423
USA

The HART protocol is supported by the HART Communications Foundation in Austin Texas, 
www.hartcomm.org.  HART is a registered trademark of the HART Communications Foundation.

Phone 281-855-9639
Fax 832-422-4391
www.micro

fl

 x.com

Summary of Contents for 101-0019









Reviews: