Driver Pre-Installation
If you are using Windows 10, 8, 7, Vista, XP, or 2000 - the USB drivers can be
installed before the RS-485 converter is connected to the PC’s USB port. After
the drivers are installed, Windows will automatically detect the converter when
it is connected to a USB port and complete the setup.
To pre-install the drivers, run
Setup.exe
from the included CD and
follow the on-screen prompts. The CD
will auto-run this fi le if the Windows
Autorun feature is enabled for your CD
drive. The setup.exe is a utility that
will determine your operating system
and run the correct installer. Click the
Install RS-485 Converter USB drivers...
button to pre-install the drivers. The
driver installer will guide you through
the setup process.
Installers can also be run manually from the CD using
\
x86\DPInstx86.exe
for 32
bit operating systems or
x\64\DPInstx64.exe
for 64 bit operating systems.
2
RS-485 Convert Setup Utility
Run the setup utility before
connecting to the USB port.
Important!
