Microelectronic NH MicroM30/12 HDMI USB, Operating Manual, Page: 9 / 95

9
Safety instructions
Please read the safety instructions carefully before
operating the receiver.
Please follow all warnings and instructions on the
equipment and in the operating manual.
Basic safety instructions
Electrical connection
•
Separate the receiver from the power source in case of
operational disruptions. Please note: The receiver will
remain live, even if it is turned off with the mains switch
on the rear side.
•
Do not expose the receiver to rain or any kind of
humidity to avoid risk of fire and electric shock.
•
Never open the casing. Otherwise, there is a risk of
electric shock.
•
Connect the receiver only to a professionally installed
mains socket. This is either:
- for external power pack:
o
an approved mains socket 100-240 V~, 50-
60 Hz or
- for 12V cable
o
an approved d.c. source of 11V - max. 14V
•
The total current at the antenna connection of the
receiver ‘LNB IN’ must not exceed 300 mA.
•
Pull out the mains plug or the 12 V cable from the
socket if the equipment is not in use for a longer period
of time. Only pull at the plug, not at the cable.