Microelectronic NH MicroM30/12 HDMI USB, Operating Manual, Page: 37 / 95

37
The receiver
Caution!
Check that connections of all equipment and the
antenna are proper before connecting the receiver to
the mains.
Insert the mains plugs of the connected equipment in
the mains socket and switch it on.
Switch on the AV channel of the TV set. If the TV set
recognizes the switching voltage emitted by the
receiver, it will switch automatically to the AV mode.
When connected via HDMI, it is dependent on the
connected TV set, whether it automatically switches to
the AV mode, or whether you even need to call the AV
channel.
Insert the mains plug of the receiver in the mains
socket. Turn on the mains switch on the rear side of
the receiver. The device is in normal mode. The green
LED is lit.
If you want to operate your receiver with 12V, insert
the 12V cable into the “DC 12V IN” socket of the
receiver and connect it to your power source.
The receiver is supplied with preset TV channels and can
be used directly. If you want to check if new channels are
available, initiate a scan for broadcasting stations. Read
the information further below for this purpose.