86
shows channel
location.
The TV set does
not display any
image.
The TV set is not in AV mode.
Switch the TV set to the respective AV input.
The antenna is not directed exactly towards
the satellite.
Direct the antenna more precisely. For this
purpose, use the Info key of the remote
control. The signal strength will be displayed
for directing the antenna properly.
Poor image,
blocking error,
formation of small
blocks, sound
stops
The LNB is defective. Replace the LNB.
No image, no
sound, signal
strength and
signal quality OK
The satellite antenna has been directed to a
wrong satellite.
Bad reception of:
DSF, etc.
Wireless telephone is disturbing (DECT
standard). Move your telephone to another
place.
System crash
(receiver cannot
be operated
anymore.)
Should it come to the improbable case of a
system crash, separate the receiver from the
mains supply. Connect it again after 10
seconds. With this, the problem can be solved
usually.
Please note: a software crash is not a
malfunction and no guarantee will apply. For
technical equipment (e.g. also PC, radio
network, etc.) a software crash can be solved
simply and quickly by following this procedure.
Summary of Contents for MicroM30/12 HDMI USB
