Microelectronic NH MicroM30/12 HDMI USB, Operating Manual, Page: 53 / 95

53
•
TP list
In this submenu, you can edit the transponders of the
satellites enabled in the submenu item "satellite list“.
o
Edit (red function key): Editing of the parameters of
the marked transponder. Please note that this
change will have an influence on the channels of the
edited transponder!
o
New (green function key): Here, a new transponder
not being saved yet can be created. Use this
function to scan for a channel if you know the
required details.
o
Delete (yellow function key): Deleting of the marked
transponder.
o
Scan (blue function key): Scanning of the marked
transponder for new channels taking into
consideration the settable scanning filters.
Example:
You are aware that new channels are broadcasted on a
determined frequency.
Satellite: ASTRA 19.2° East - Frequency: 10836 MHz
Symbol rate: 22.000 Ks/s - Polarity: Horizontal
Now, proceed as follows:
Submenu item TP list.
Press the green function key of your remote control.
The "New TP" box appears.
Enter the frequency 10836 with the keys 0-9 of the
remote control.