background image

Micro

dome Duo® 

                                        

Installation Manual

 

 

Page | 4        [email protected] 

 

 

 

                       

+1.818.937.0700 

877.CAMERA.8 

www.arecontvision.com 

[email protected]                

 

 

Warranty Information

 

Global (3 Year) Limited Warranty

 

ARECONT VISION warrants to 

Purchaser (and only Purchaser) (the “Limited Warranty”), that: (a) each 

Product shall be free from material defects in material and workmanship for a period of 

thirty-six (36) months

 

from the date of shipment (the “Warranty Period”); (b) during the Warranty Period, the Products will materially 
conform with the specification in the applicable documentation; (c) all licensed programs accompanying the 
Product (the “Licensed Programs”) will materially conform with applicable specifications. Notwithstanding the 
preceding provisions, ARECONT VISION shall have no obligation or responsibility with respect to any Product 
that (i) has been modified or altered without ARECONT VISION’s written authorization; (ii) has not been used 
in accordance with applicable documentation; (iii) has been subjected to unusual stress, neglect, misuse, 
abuse, improper storage, testing or connection; or unauthorized repair; or (iv) is no longer covered under the 
Warranty Period. ARECONT VISION MAKE NO WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED, 
STATUTORY OR OTHERWISE, OTHER THAN THE EXPRESS LIMITED WARRANTIES MADE BY 
ARECONT VISION ABOVE, AND ARECONT VISION HEREBY SPECIFICALLY DISCLAIMS ALL OTHER 
EXPRESS, STATUTORY AND IMPLIED WARRANTIES AND CONDITIONS, INCLUDING THE IMPLIED 
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT 
AND THE IMPLIED CONDITION OF SATISFACTORY QUALITY. ALL LICENSED PROGRAMS ARE 
LICENSED ON AN “AS IS” BASIS WITHOUT WARRANTY. ARECONT VISION DOES NOT WARRANT THAT 
(I) THE OPERATION OF THE PRODUCTS OR PARTS WILL BE UNINTERRUPTED OR ERROR FREE; (II) 
THE PRODUCTS OR PARTS AND DOCUMENTATION WILL MEET THE END USERS’ REQUIREMENTS; 
(III) THE PRODUCTS OR PARTS WILL OPERATE IN COMBINATIONS AND CONFIGURATIONS 
SELECTED BY THE END USER; OTHER THAN COMBINATIONS AND CONFIGURATIONS WITH PARTS 
OR OTHER PRODUCTS AUTHORIZED BY ARECONT VISION OR (IV) THAT ALL LICENSED PROGRAM 
ERRORS WILL BE CORRECTED. 

For RMA and Advance Replacement information visit 

http://www.arecontvision.com

 

 

 

 

 

 

 

Summary of Contents for AV10655DN-08

































Reviews: