MicroCool RHINO 15, Installation & Maintenance Manual

Page: 18 / 38

Master Rhino Manual_
March 2020.docx
March 20 Page 18 of 38
Inlet Pressure Fault
•
Inlet water pressure dropped below safe
operating limit
•
30 second restart delay is in process
• If water pressure is restored within 30 second
delay, pump will start up and operate normally
• If water pressure is not restored, another 30
second delay will start
• Pump will attempt to restart 4 times before the
system locks out on a fault
Frequency Inverter Fault
•
Pump system has faulted on VFD fault
• 30 second restart delay is in process.
• If VFD fault is cleared within 30 seconds pump
will restart and operate normally.
• The pump will attempt to restart 4 times before
the system locks out on a fault.
Service Oil Change
• Pump requires service.
•
Change pump oil – ( Please dispose of used
oil in accordance with local laws and
regulation ).
• Press F4 key 3 times consecutively to reset
Manual Disabled
•
F1 button disabled
• Settings to enable
Service UV Lamp
•
Change UV lamp
• Press F4 three times to rest.