TMM-640 VoIP Touchscreen Master Module
Document IM-TMM-640-1.2
Page 17
Click on the
Network Address
menu tab on the menu bar to bring up the
Network Settings
menu.
In the
Network Settings
menu, set the following parameters:
Set
Mode
to “s
tatic
” (to assign the master a static IP address). Static is recommended for all IP master stations.
Set
IP Address
to the IP address for this master. It should be assigned by your network administrator, and must
not conflict with other IP addresses on this system. In this case this master was assigned address “192.268.0.102”
Set
IP Network Mask
to the Network mask for the network. This is also assigned by your network administrator,
and should be the same network mask used for all DXL equipment including IP masters, IP stations, and IP page
speakers, as well as the DXL DCC’s. This example network is assigned “
255.255.255.0
” for the network mask.
The
Gateway
,
Domain
, and
DNS Servers
settings are typically used if your DXL system extends across one
network. They are typically left blank, but you can assign the
Gateway
setting to your gateway server IP address
for this network, the
Domain
setting to the domain name of your network, and the
DNS Servers
setting to the
DNS server IP address for this network.
Once you have entered all of the settings you require, click the “
Update
” button.
Note that changing the Network Settings will require a reboot for the settings to take effect. In this case you will
get an additional screen outlining the reboot options. You can either use the “
Reboot Now
” option and re-
establish the connection at the new IP address by typing
“
http://<address of master>
”, in your web browser, or use the “
Reboot Later
” option and continue to change the
settings and reboot after you have changed all of the settings.
