Printer Commands
Chapter 5
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
50
410 ECA Operators Manual
CHAPTER 6: LOGOS
The Microcom 410 ECA printer is capable of storing two logos at 0 and 180 degree rotations, or
one logo in four (0 ,90, 180, and 270 degree) rotations. You may either use the Microcom "OGO"
software to create an OGO file from a downsized PCX of PCC file, or use your own software to
format a graphics file into a form that the printer can understand.
The only limitation in graphic design is the 248 X 248 pixel resolution due to memory restraints.
Though this resolution is sufficient for most applications, Microcom has PC software available that
will convert PCX and PCC files.
Remember: Use the X and Y format multiplier features to increase the size of your logo past the
248 by 248 window.
GOOD IDEA:
Create your own software to manipulate graphic files into the OGO format.
BETTER IDEA:
Use the "OGO" software to turn your PCX file into the OGO format.
6.1
PROCEDURE FOR USING MICROCOM OGO SOFTWARE
To Create a Four Rotation Logo:
1:
Create a PCX or PCC file by scanning, graphics utility, etc.. Be sure the image,
excluding white space, is within the 248 X 248 resolution
2:
Install Microcom "OGO" software onto PC
3:
Type at DOS prompt - OGO filename.ext EX: OGO tree.pcx
4:
Down-load resulting tree.ogo file to printer
5:
Access logo by using CGN 3, a TCI of 7, and FO of 0, 1, 2, or 3
To Create Two Logos in 0 and 180 Degree Rotations:
1: For logo #1:
A) Type at DOS prompt - OGO filename.ext /1
EX: OGO tree.pcx /1
B) Down-load resulting tree.og1 file to printer
C) Access logo #1 by using CGN 3, TCI 7, and FO of 0 or 1
2: For logo #2:
A) Type at DOS prompt - OGO filename.ext /2
EX: OGO bird.pcx /2
B) Down-load resulting bird.og2 file to printer
C) Access logo #2 by using CGN 4, TCI 7, and FO of 0 or
