Chapter 5
Printer Commands
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
410 ECA Operators Manual
41
5.3.6 TAG HEADER COMMANDS
The following ^D commands, 41 - 51, all refer to tag header values. The printer will use
these values for all subsequent tag formats unless a ^D40 is executed, or the machine is
powered off.
More information on what these tag header values mean can be found in section 4.3.
Example usage: ^A924^D43
5
- Sets the tag height for all following formats to 5 inches.
^A
^D
Command
40
Clear Commands 41-51.
XX
41
Load number of fields in layout (HFM):
^A determines number of fields.
XX
42
Load tag width in dots (LSX):
^A indicates the width.
XX
43
Load tag in dots (LSY):
^A defines the height.
XX
44
Load web size in dots (WEB):
^A specifies the web size.
XX
45
Load gap size in dots (GAP):
^A denotes the gap size.
XX
46
Load print speed (DPS):
^A designates the print speed.
XX
47
Load tag control byte (LCB):
^A specifies the number.
XX
48
Load number of steps to activate gap detector (AGD):
^A determines the
number of steps.
XX
49
Load number of steps past gap (SPG):
^A designates the number of steps.
XX
50
Load X direction offset (OFX):
^A indicates the X offset.
XX
51
Load Y direction offset (OFY):
^A denotes the Y offset.
