Printer Commands
Chapter 5
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
34
410 ECA Operators Manual
^A
^D
COMMAND
24
Change SW4:
Change software dip switch #4. Below is the ^AB sequence.
12345678
^ABxxxxxxxx
*******.)Q
Always 0
******.))Q
Always 0
*****.)))Q
Always 0
****.))))Q
Always 0
***.)))))Q
Always 0
**.))))))Q
Always 0
*.)))))))Q
Always 0
.))))))))Q
Always 0
Position:
1
Always 0
2
Always 0
3
Always 0
4
Always 0
5
Always 0
6
Always 0
7
Always 0
8
Always 0
25
Dip Switch Security:
Load the dip switch values in this command before loading
them into the intended switch bank. This procedure must be followed in order to
change the dip switch settings.
For example: ^AB10101010^D25
5
^AB10101010^D21
5
^D21
5
XX
36
Adjust Contrast Base:
Used to adjust the contrast base point for such things as
high-speed paper and printhead wear. This command is stored in the EEprom and
skews the entire contrast window (^D35). This command has a ^A range of 10 to
200%.
