2.
Product Overview
2.1
SAMA5D2-PTC-EK Features
The SAMA5D2-PTC-EK follows the Microchip MPU strategy for low cost evaluation kits with maximum
reuse capability, and is built on the SAMA5D2 Xplained Ultra (XULT) hardware and software ecosystem.
This board is mainly dedicated to evaluating the Peripheral Touch Controller capabilities.
Table 2-1. SAMA5D2-PTC-EK Features
Characteristics
Specifications
Components
Processor
SAMA5D27-CU (289-ball BGA) 14x14mm
body, 0.8mm pitch
–
Clock speed
MPU: 24 MHz, 32.768 KHz
PHY: Crystal 25 MHz
–
Memory
Two 16-bit, 2-Gbit DDR2
One 4-Gbit Nand Flash
One QSPI Flash
One Serial Data Flash (optional)
One EEPROM
Winbond W972GG6KB-25
Micron MT29F4G08
Microchip SST26VF064B
Microchip SST26VF032B
Microchip 24AA02E48
Display
One LCD interface connector
RGB, 18 bits
SD/MMC
One standard SD card interface
One microSD card interface
With 3.3V/1.8V power switch
–
USB
One USB host type A
One USB device type MicroAB
One USB HSIC
With 5V power switch
–
Connector not mounted
Ethernet
One ETH PHY
Micrel KSZ8081RN
Debug Port
One JLINK-OB/ JLINK-CDC
One JTAG interface
Embedded JLINK-OB and JLINK-
CDC (ATSAM3U4C TFBGA100)
Board Monitor
One RGB (Red, Green, Blue) LED
Four push button switches
–
DisableBoot, Reset, WakeUp, User
Free
Expansion
One set of XPRO WINGS connectors
One ITO FLEX connector
One Port B connector
One PIOBU connector
One mikroBUS connector
Dedicated PTC QTouch
Optional
Optional
Optional
–
SAMA5D2-PTC-EK
Product Overview
©
2017 Microchip Technology Inc.
DS50002709A-page 4
