manualshive.com logo in svg

Microchip Technology MPLAB PICkit 4, User Manual

Share
Download
Microchip Technology MPLAB PICkit 4 User Manual Download Page 63

12. 

Revision History

12.1 

Revision A (May 2018)

Initial release of this document.

12.2 

Revision B (August 2018)

• Added information on the Debug Adapter Board in 

2.3  MPLAB PICkit 4 In-Circuit Debugger Components

.

• Expanded 

Table 11-5

 table to include pinouts for additional interfaces.

• Added a note to refer to device data sheets and application notes for debug interfaces in 

11.3.2  Pinouts for

Interfaces

 and 

3.2  Target Communication Connections

.

12.3 

Revision C (October 2018)

• Updated diagram in 

Figure 11-2

 .

• Updated information in Table

Table 11-5

.

• Added 

Figure 11-3

 to provide pinout information for the debugger adapter board (AC102015) for use with the

PICkit 4 and various interfaces.

12.4 

Revision D (January 2020)

• Added 

10.2.6  Programmer-To-Go

 section and updated references to Programmer-To-Go throughout document.

• Updated diagram of MPLAB PICkit 4.
• Added 

9.  Engineering Technical Notes (ETNs)

 section.

• Modified target voltage values.

 

Revision History

©

 2020 Microchip Technology Inc.

 User Guide

DS50002751D-page 63

Summary of Contents for MPLAB PICkit 4






















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands