background image

Preface

 2016 - 2018 Microchip Technology Inc.

DS50002723A-page 7

RECOMMENDED READING

This user’s guide describes how to use the MIC7401 Evaluation Board. Another use-
ful document is listed below. The following Microchip document is available and 
recommended as a supplemental reference resource:

MIC7401 Data Sheet 

– “

Configurable PMIC, Five-Channel Buck Regulator Plus 

One-Boost with HyperLight Load® and I

2

C Contro

l”, DS20005618A.

THE MICROCHIP WEB SITE

Microchip provides online support via our web site at 

www.microchip.com

. This web 

site is used as a means to make files and information easily available to customers. 
Accessible by using your favorite Internet browser, the website contains the following 
information:

Product Support

 – Data sheets and errata, application notes and sample 

programs, design resources, user’s guides and hardware support documents, 
latest software releases and archived software

General Technical Support

 – Frequently Asked Questions (FAQs), technical 

support requests, online discussion groups, Microchip consultant program 
member listing

Business of Microchip

 – Product selector and ordering guides, latest Microchip 

press releases, listing of seminars and events, listings of Microchip sales offices, 
distributors and factory representatives

PRODUCT CHANGE NOTIFICATION SERVICE 

Microchip’s customer notification service helps keep customers current on Microchip 
products. Subscribers will receive e-mail notifications whenever there are changes, 
updates, revisions or errata related to a specified product family or development tool of 
interest.
To register, access the Microchip web site at 

www.microchip.com

, click on 

Product 

Change Notification

 and follow the registration instructions.

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels:
• Distributor or Representative
• Local Sales Office
• Field Application Engineer (FAE)
• Technical Support
Customers should contact their distributor, representative or field application engineer 
(FAE) for support. Local sales offices are also available to help customers. A listing of 
sales offices and locations is included in the back of this document.
Technical support is available through the web site at: 

http://www.microchip.com/support

.

DOCUMENT REVISION HISTORY

Revision A (May 2018)

• Initial Release of this Document.

Summary of Contents for MIC7401








































Reviews: