Microchip Technology MIC7401, User Manual

Page: 25 / 39

GUI Description

2016 - 2018 Microchip Technology Inc. DS50002723A-page 25
3.2.3 I
2
C Generic Register View
The I
2
C Generic Register View area ( Figure 3-5 ) contains the items in
Table 3-2 . This section of the I
2
C Monitor GUI is common for any device eval-
uated. Any register that is currently modified and not saved to the device will
have its value appear in RED.
FIGURE 3-5: GENERAL REGISTER VIEW AREA
The specific registers for MIC7401 are described in the MIC7401 data sheet.
TABLE 3-2: I
2
C GENERIC REGISTER VIEW ITEMS
Panel Item Description
Operation Register This section shows the registers available
for read/write operations.
Read/Write These buttons are used for single register
read/write operations.
ReadAll/WriteAll These button are used for reading/writing all
the available registers
Number of Registers In this section, the user can set the number
of available registers for read/write
operations.
Update This button sets the number of available
registers for read/write operations in the
Register area.
Register Area This section shows the current status of the
address of the registers and their content.