MIC7401
EVALUATION BOARD
USER’S GUIDE
2016 - 2018 Microchip Technology Inc.
DS50002723A-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
MIC7401 Evaluation Board. Items discussed in this chapter include:
•
•
Conventions Used in This Guide
•
•
•
Product Change Notification Service
•
•
DOCUMENT LAYOUT
This document describes how to use the MIC7401 Evaluation Board as a development
tool to emulate and debug firmware on a target board. The manual layout is as follows:
•
– Important information about the MIC7401
Evaluation Board.
•
Chapter 2. “Installation and Operation”
– Includes instructions on installing and
starting the Microchip Chip Manager application.
•
2
C Monitor 3.1.0.
software application using the MIC7401 included in the kit.
•
Appendix A. “Schematic and Layouts”
– Shows the schematic and layout
diagrams for the MIC7401 Evaluation Board.
•
Appendix B. “Bill of Materials (BOM)”
– Lists the parts used to build the
MIC7401 Evaluation Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(
www.microchip.com
) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics, to open a list of available online help files.
