MCP401XEV EVALUATION BOARD
USER’S GUIDE
©
2010 Microchip Technology Inc.
DS51888A-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
MCP401XEV Evaluation Board. Items discussed in this chapter include:
• Conventions Used in this Guide
DOCUMENT LAYOUT
This document describes how to use the MCP401XEV Evaluation Board as a
development tool to emulate and debug firmware on a target board. The manual layout
is as follows:
•
– Important information about the MCP401XEV
Evaluation Board.
•
Chapter 2. “Installation and Operation”
– Includes instructions on how to get
started with this evaluation board.
•
Appendix A. “Schematic and Layouts”
– Shows the schematic and layout
diagrams for the MCP401XEV Evaluation Board.
•
Appendix B. “Bill of Materials (BOM)”
– Lists the parts used to build the
MCP401XEV Evaluation Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.
Summary of Contents for MCP401XEV
Page 1: ...2010 Microchip Technology Inc DS51888A MCP401XEV Evaluation Board User s Guide...
Page 4: ...MCP401XEV Evaluation Board User s Guide DS51888A page 4 2010 Microchip Technology Inc NOTES...
Page 38: ...MCP401XEV Evaluation Board User s Guide DS51888A page 38 2010 Microchip Technology Inc NOTES...
