Microchip Technology BM62, User Manual

Page: 50 / 76

BM62 EVB User’s Guide
DS70005260C - Page 50

2016-2017 Microchip Technology Inc.
FIGURE 3-37: UPDATING FLASH CODE
6. After the flash code update, click Disconnect and remove the micro-USB cable.
Then set SW12 to Application mode ( Figure 3-32 ) and reboot.
3.7 BLE DEMONSTRATION
In this demonstration, the user can perform a data transmission between the BM62
EVB and a smartphone. Perform the following steps for demonstration:
1. Set switch SW12 to Application mode, see
Figure 3-32 .
2. Connect the BM62 EVB to a PC using micro-USB cable, as illustrated in
Figure 3-38 .
FIGURE 3-38: BLE DEMONSTRATION
3. On the BM62 EVB, long press the MFB button to turn on the Bluetooth. Both
LED1 (blue) and LED2 (red) will blink together. Then, continue to press the MFB
Note: This demonstration uses SPK Command Set tool. For information about
emulating Host MCU using SPK Command Set tool, refer to
Appendix A .