MCP19111 PMBus™ Protocol-Enabled POL Converter Reference Design
DS50002379A-page 8
2015 Microchip Technology Inc.
DOCUMENT LAYOUT
This document describes how to use the MCP19111 PMBus™ Protocol-Enabled
Point-of-Load Converter Reference Design as a development tool to emulate and
debug firmware on a target board, as well as how to program devices. The document
is organized as follows:
•
Chapter 1. “Product Overview”
– Important information about the MCP19111
PMBus™ Protocol-Enabled Point-of-Load Converter Reference Design.
•
Chapter 2. “Installation and Operation”
– Includes instructions on how to get
started using the MCP19111 PMBus™ Protocol-Enabled Point-of-Load Converter
Reference Design.
•
Chapter 3. “Calibration Procedure”
– Includes instructions on the calibration
procedure of the MCP19111 PMBus™ Protocol-Enabled Point-of-Load Converter
Reference Design.
•
Chapter 4. “Typical Performance Data, Curves and Waveforms”
– Includes
typical performance graphs of data, curves and waveforms.
•
Appendix A. “Schematics and Layouts”
– Shows the schematic and layout
diagrams for the MCP19111 PMBus™ Protocol-Enabled Point-of-Load Converter
Reference Design.
•
Appendix B. “Bill of Materials (BOM)”
– Lists the parts used to build the
MCP19111 PMBus™ Protocol-Enabled Point-of-Load Converter Reference
Design.
•
Appendix C. “Calibration Example”
– Gives an example of a calibration
procedure for the MCP19111 PMBus™ Protocol-Enabled Point-of-Load Converter
Reference Design.