Microcare 600W-24V, User Manual

Page: 7 / 10

6
5.2.4 Battery Low/High
5.2.5 Temp
5.3 Connecting the Load

Ensure that the load does not exceed the rating of the inverter.

Ensure that the Inverter is switched off. Status LED flashes.

Plug the equipment into the AC outlet socket of the inverter.

Switch the inverter ON.
“Push the On/Reset Button”

Switch the load ON.
6. MAINTENANCE AND SERVICE
6.1 Fuse Replacement
If the inverter does not switch on, there is a possibility of a blown fuse caused by DC reverse polarity,
short circuit or overload.
To check the fuses:

Disconnect all AC loads

Disconnect the Battery

Remove the Fuses as indicated in on diagram 3.2.

Visually inspect each of the 2 fuses.

Blown fuses will have a damaged filament.

Replacement fuses should be 30A rated quick-blow automotive type fuses only.

Reconnect wire connections per the installation instructions in Section 4.0
“BATTERY LED” Steady ON indicates that the inverter has
switched off due to low battery voltage < 10,5V or high battery
voltage >16V
“TEMP LED” Steady ON indicates that the inverter has switched
off due to high temperature >80 Degree Celsius