Microcare 1kW24V, Manual

Page: 16 / 22

15
To change the BATTERY CHARGE menu push ENTER button:
The Settings available for this function are as follows:
50% OF RATED CHR
- (Default). 50% of charge rate as per list supplied below.
75% OF RATED CHR - 75% of charge rate as per the list supplied below.
MAX CHARGE RATE - 100% of charge rate as per the list supplied below.
TURNED OFF - 0% of charge rate as per the list supplied below.
SLOW CHARGE - 5% of charge rate as per the list supplied below.
25% OF RATED CHR - 25% of charge rate as per the list supplied below.
INVERTER CHARGE AMPS
1Kw24V 30A
In regards to the battery charge level – The Level selected will allow the battery charge to
the batteries.
25% OF RATED CHR – On a 1Kw24V Inverter will allow a charge of 7.5A to the battery.
75% OF RATED CHR – On a 1Kw24V Inverter will allow a charge of 22.5A to the battery.
To change the menu, push the UP button, The menu will then change to:
This setting is not to be adjusted on the UPS Units.
AC INPUT POWER
LEVEL (X) SELECTED
MICROCARE
ON OFF
ENTER Menu Down Menu Up
OK Inverter Error
BATTERY CHARGE
LEVEL (X) SELECTED
MICROCARE
ON OFF
ENTER Menu Down Menu Up
OK Inverter Error