Microcare 1kW24V, Manual, Page: 13 / 22

12
To change the menu, push the UP button, The menu will then change to:
The settings available are as follows:
AC OUTPUT = NOR
- This will allow the inverter to supply rated power.
A 5Kw Inverter will supply 5kw of Power.
AC OUTPUT = 200% - This will allow the inverter to supply 200% rated power.
A 5Kw Inverter will supply 10kw of Power.
If the grid fails and the load is exceeding 100% of
the inverter power, the inverter will shut down due
to overload.
To change the menu, push the UP button, The menu will then change to:
The settings available are as follows:
NO DELAY
As soon as Grid power is available the Inverter will synchronise and
switch from battery to Grid.
DELAY = 30Sec
30 seconds after Grid power is available the Inverter will
synchronise and switch from battery to Grid.
DELAY = 5 Min
5 minutes after Grid power is available the Inverter will synchronise
and switch from battery to Grid.
It would be a good idea to select a 30 seconds or 5 minute delay after load shedding to allow the
grid power to stabilise.
IF AC INPUT = ON
AC OUTPUT = NOR
MICROCARE
ON OFF
ENTER Menu Down Menu Up
OK Inverter Error
LOAD TRANSFER
NO DELAY
MICROCARE
ON OFF
ENTER Menu Down Menu Up
OK Inverter Error