EN
20
Charging the battery
The following describes the charging process:
●
Take the battery out of the holder
●
Connect the battery to the charger
●
Plug the charger to an electrical outlet (220 V household socket / 12 V cigarette
lighter in car)
●
Lights on battery start to blink and show indication of charging status
●
When battery is fully charged lights will stay on
●
Battery SOC (State Of Charge): To ensure the longest possible range, the controller
will limit the scooter to one riding mode as soon as the battery drops under 30%.
The installed batteries are rechargeable
lithium-ion batteries. Never charge batteries
that are not intended to be recharged.
When battery is fully charged, it is not
recommended to use electronic brake while
riding downhill for a long time. Otherwise,
in order to prevent an overcharge from
regenerative braking, the battery may start
automatic protection by shutting down.
It will restart after one minute of shutdown.
Instead, it is recommended to use the foot or
mechanical brake while riding in situations
with long downhills.
WARNING
WARNING
Use battery as a power bank:
To charge your smart device through the USB cable, please turn ON the battery and
press twice on the switch button.
●
Only Micro chargers are suitable for
charging Micro electric scooters.
●
For a better seal, make sure to close the
protective cover of the charging connector
after each use.
: charger ref.: 5421 (standard
charger EU), 5422 (car charger)
