16
The speed sensor cable has a GREEN sensor body and mates
with the main harness cable having a YELLOW cable tie near
the 3-pin M/P connector. Make certain that you install the
correct sensor cable and connect it to the correct connector
on the main harness. The speed sensor is the same as the
flow sensor and can be connected to the flow sensor input of
the main harness cable. The speed sensor always connects
to the main harness lead with the YELLOW tie and flow
sensors always connect to the main harness lead with the
GREEN tie.
See Illustration 10.
NOTE: Sensors with GREEN bodies can be used for either
SPEED or FLOW but not for RUN/HOLD.
The Run/Hold Sensor also uses the same type of connector as
the speed and flow sensors. However, the Run/Hold Sensor
has a grey tie near the 3-pin M/P connector, the sensor body
is black, and it always connects to the main harness lead with
the grey tie.
See Illustration 10.
Installation
(cont)
Speed Sensor Installation
(cont)
Connecting the Speed Sensor Cable
Illustration 10
SENSOR IDENTIFICATION CHART
SENSOR
SENSOR BODY COLOR
MAIN HARNESS TIE COLOR
Speed
Green
Yellow
Flow
Green
Green
Run/Hold
Black
Gray
A
B
C
D
E
F
G
H
J
K
10-PIN ME
TRI-P
ACK SHROUD
A
B
C
SPEED
RUN/HOLD
POWER
3-PIN
M/P 150
SHROUD
MT
-2400 C
ONSOLE
OPTION
RELIEF CONTROL
SPEED POWER
SPEED SIGNAL
SPEED GROUND
RUN/HOLD PWR
RUN/HOLD SIG
RUN/HOLD GND
BATTERY GND
BATTERY PWR
20-GA. BRN
20-GA. RED
20-GA. ORN
20-GA. YEL
20-GA. GRN
20-GA. BLU
20-GA. VIO
20-GA. GRY
20-GA. WHT
20-GA. BLK
N/C
18-GA. RED
18-GA.WHT.
18-GA. RED
18-GA. BLK.
18-GA. WHT
18-GA. RED
18-GA. BLK.
18-GA. BLK.
18-GA. RED
A
B
C
D
E
F
G
H
J
K
10-PIN ME
TRI-P
ACK
TOWER
BLACK TIE
YELLOW TIE
RELIEF RELAY
GRAY TIE
3-PIN
M/P 150
TOWER
3-PIN
M/P 150
TOWER
A
B
C
A
B
C
Vansco Radar Speed Sensor
Contact a Micro-Trak sales representative for de tails on any of these products,
or call Mi cro-Trak Systems, Inc. at 1-800-328-9613.
Astro II GPS Speed Sensor
Speed Sensor Options
In addition to the standard Hall-effect magnetic speed
sensor, the MT-9000 may be interfaced with a va ri ety of other
speed sensing equipment. Several options are listed below.
ASTRO SERIES OR OTHER GPS SPEED SENSOR INTERFACES
The MT-9000 may also be used with most GPS speed sensors
that output a pulsed signal, such as the Micro-Trak Astro
II and 5, SkyTrak or Dickey-John GPS speed sensors. An
adapter cable may be required.
VANSCO
™
RADAR SPEED SENSOR
The Vansco radar speed sensor uses a microwave (radar)
signal to deliver a reliable, accurate speed signal for electronic
equipment. It features state-of-the-art electronic design/
manufacturing, rugged aluminum housing and complete
testing and certification.
RADAR INTERFACE
The MT-9000 may also be interfaced with most popular
radar ground speed sensors. An adapter cable is re quired for
proper interface.
SEE APPENDIX H FOR LIST OF ADAPTER CABLES FOR RADAR.
GPS SPEED SENSOR INTERFACE
The MT-9000 may also be used with most GPS speed sensors
that output a pulsed signal, such as SkyTrak or Dickey-John
GPS speed sensors. An adapter cable may be required.
