background image

MICROMATIC.COM   |   866-327-4159        

 

 

 

 

 

 

 

       REMOTE POWER PACK SERVICE MANUAL

   

|

   15

WARRANTY

All power packs carry a full warranty against defects in material and workmanship for a period of eighteen (18) months on 

parts and one (1) year on labor. The compressor is warrantied for an additional three and one-half (3 1/2) years. All loss of 

sales must be borne by the purchaser.

WARRANTY CLAIMS PROCEDURE:

Purchaser shall notify Micro Matic of any defect discovered in the Product during the Warranty Period, and obtain a return 

authorization number. Purchaser must ship the Product per Micro Matic’s instruction. After receipt of the Product, Micro 

Matic shall, at its option, repair (or authorize the repair of), or replace or refund the purchase price for the Products found by 

Micro Matic to be defective. Micro Matic’s determination of defects is final. Failure by Purchaser to give notice of claims of 

breach of warranty within the Warranty Period shall be deemed an absolute and unconditional waiver of Purchaser’s claim 

for such defects. Products repaired or replaced during the Warranty Period shall be covered by the foregoing warranties 

for the remainder of the original Warranty Period or ninety (90) days from the date of delivery of the repaired or replaced 

Products, whichever is longer.

ALL REPAIRS MUST BE FIRST AUTHORIZED BY MICRO MATIC PER THE ABOVE PROCEDURE. UNAUTHORIZED REPAIRS 

WILL NOT BE REIMBURSED BY MICRO MATIC UNDER ANY CIRCUMSTANCES.

Micro Matic is not responsible for parts damaged from factors including, but not limited to any part that has been subject 

to misuse, neglect, alteration, accident, unauthorized service, abuse, or to any damage caused by transportation. This 

warranty does not cover items subject to normal wear and tear (gaskets, seals, o-rings, etc.). 

PURCHASER RESPONSIBILITY:

Except as expressly provided in this Agreement, Purchaser assumes all other responsibility for any loss, damage, or injury 

to persons or property arising out of, connected with, or resulting from the use of Products, either alone or in combination 

with other products or components. In no event will Micro Matic be responsible for incidental, consequential or punitive 

damages of any kind, including without limitation, claims for loss of beer, loss of gas or loss of sales.

OTHER WARRANTIES DISCLAIMED:

These are the sole and exclusive warranties and conditions given by Micro Matic with respect to the products and services 

and are in lieu of and exclude all other warranties or conditions, express or implied, arising by operation of law or otherwise, 

including without limitation, warranties of merchantability, fitness for a particular purpose and non-infringement, whether 

or not the purpose or use has been disclosed to Micro Matic in specifications, drawings or otherwise, and whether or not 

Micro Matic’s products are specifically designed and/or manufactured by Micro Matic for purchaser’s use or purpose.

LIMITATION OF REMEDY:

Purchaser’s sole and exclusive remedy for breach of any warranty or condition under this Article IV shall be limited to the 

repair, correction or replacement, or refund of the purchase price paid in respect of the defective Products, unless the 

claim falls under the provisions of Section 6.2, in which case Purchaser may also claim damages in accordance with the 

terms of Section 6.2.

Summary of Contents for MMPP4302-PKG-R

















Reviews: