MICRO-MARK 90533, Instruction Manual

Page: 9 / 19

- 8 -
periodically and replace if damaged. Keep handles dry, clean, and free
from oil and grease.
23. CHECK DAMAGED PARTS. Before further use of the cleaner, a guard
or other part that is damaged should be carefully checked to determine
that it will operate properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts, breakage of parts,
mounting, and any other conditions that may affect its operation. A
guard or other part that is damaged should be properly repaired or
replaced by an authorized service center unless otherwise indicated
elsewhere in this instruction manual. Have defective switches replaced
by authorized service center. Don’t use the cleaner if switch does not
turn it on and off.
24. REPLACEMENT PARTS. When servicing, use only identical
replacement parts.
25. STORE IDLE CLEANER. When not in use, the cleaner should be stored
indoors.
26. Be kind to your cleaner. Rough handling can cause breakage of even
the most sturdily built cleaner.
27. Do not attempt to clean the exterior or interior with benzine, thinner
or cleaning chemicals. Cracks and discoloration may be caused.
28. Do not use cleaner in an enclosed space where flammable, explosive
or toxic vapors are given off by oil-base paint, paint-thinner, gasoline,