- 16
• The filters are consumable and are recommended to have some spares
on hand. If the filter cannot be shaken clear of particles in may be time
to order a replacement filter from Micro-Mark.
Troubleshooting:
Vacuum Cleaner
does not work
1, Not plugged in?
2, Switch not in ‘ON’ position.
3, No electric power from
socket.
4, Motor is overheated and the
protective internal thermo
switch is active.
1, Plug into receptacle.
2, Turn switch to ‘ON’.
3. Check the electric
situation.
4. Let the motor cool down
for 2 hours and then try it
again.
Loss of suction
1, Dust tank is full?
2, Hose broken?
3, Suction hole blocked?
4, Filter not fixed well?
5, Hose connectors not fixed
Well?
1, Clean the dust tank.
2, Replace the hose.
3, Check all connection part.
4, Re-fix the filter.
5, Reassemble the hose.
Brush/nozzle
difficult to move
1, Strong suction power makes
it hard move?
1, Adjust the angle between
brush/nozzle and floor
LIMITED WARRANTY
Micro-Mark guarantees this product to be free of manufacturing defects for a period of 90
days from date of shipment, regardless of the amount of time the product has been used
and/or stored. The product, or parts thereof, will be repaired or replaced (at our option) and
shipped back to you free of charge if the following conditions have been met:
• the product is shipped back to us within the warranty period, • incoming transportation
charges have been pre-paid, • proof of purchase has been provided, and • our Service
Department determines that the problem was caused by a defect in material and/or
workmanship.
Summary of Contents for 90533
Page 3: ... 2 Parts Identification Fig 1 ...
Page 5: ... 4 Production Standard Safety Notice ...
Page 19: ... 18 ...