Page 7
scanCONTROL 3000/BL / 3002/BL
8.
First Profile
Now start the scanCONTROL Configuration Tools software. Click on
Display
Profiles
in the main window.
If the software shows the error message
No scanCONTROL found
in the status line,
please check the Ethernet connection between scanCONTROL and the PC.
On the left side you can adjust the settings for your measurement task, the right side
shows the profile data and information about the measurement.
9.
How to Access Profile Data
Profile data of scanCONTROL can be accessed via:
- GigEVision and GenICam for digital cameras via Ethernet interface
- SDK for fast application integration (C, C++, C# and others)
Please refer to the respective SDK documentation for further information on accessing
the profile data.
10.
Unpacking, Included in Delivery
- 1 scanCONTROL 30xx/BL sensor with integrated controller
- 1 PCR3000-5 multifunction cable, length 5 m; for power supply, trigger and RS422;
screw connector and free cable ends
- Calibration final inspection / assembly instructions
- 2 Protective caps
- 2 Centering elements
