Page 26
Initial Operation
IMS5x00
Signal Quality
Using the
Signal quality
function, you can influence the measuring rate and the respective averaging.
Averaging with the
Median
function is specified by the preset.
The subsequent moving averaging is specified by the
Signal quality
function.
Averaging
Description
Static
Moving with 128 vlues
Measuring rate 0.2 kHz
In the signal quality section, you can switch be-
tween three basic settings (static, balanced and
dynamic). The reaction in the chart and system
configuration is immediately visible.
i
If the controller starts up with a user-
defined measurement setting (setup), see
Chap
. 6.10, the signal quality cannot be
changed.
Balanced
Moving with 16 values
Measuring rate 1 kHz
Dynamic
Moving with 4 values
Measuring rate 6 kHz
Individual material selection is possible in the
Settings
>
Data recording
>
Material selection
menu.
