Page 37
Operation
optoNCDT 1320
Standard
Ceramics, metal
Multi-Surface
1
Printed circuit boards (PCB), hybrid
material
Light Penetration
1
Plastics (Teflon, POM), materials with
large penetration depth of the laser
Averaging
Description
static
moving, 128 values
In the area
Signal quality
you can
switch between four given basic settings
(static, balanced, dynamic and no avera-
ging).
You can instantly see the reaction
in the diagram and system configuration.
balanced
moving, 64 values
dynamic
Median, 9 values
no averaging
The area
System configuration
displays the current settings for measuring rate and RS422 in blue let-
tering. Changes to the settings are possible by means of the slide
Signal quality
or by means of the tab
Settings
.
The area
Diagram type
enables the change between graphical display of the measurement value or the
video signal, each as value time diagram.
i
After programming all the settings are to be stored permanently in a set of parameters. The next time
you turn on the sensor they are available again. Therefore use the button
Save settings
.
i
If the sensor starts with user defined measurement setting (setup), see Chap.
quality is not possible.
1) Available for the sensor models ILD1320-10/25/50.
