Page 26
FSC1/7 and FSC1000 Operation
FSC1/7, FSC1000
5.6
Performing a Measurement
Load the adjustment data set suitable for the measurement/measurement object, see Chap.
.
The system will start the measuring mode.
To measure the thickness, place the sensor on the component, avoid vibrations/tilting and trigger the
measurement. Depending on the setup configuration, press the button on the sensor or keys 1 to 3 on
the controller.
The measurement will start 300 ms after you release the measuring button.
Fig. 23 Measurement preparation
Fig. 24 Display of measurement results
If the measurement was successful, the measured thickness value and/or the calculated mean value of the in-
dividual results will be shown to the user, see
. Each measured value is saved in a log file. The results
of the individual measurements are not visible to the user.
As an option, you can activate an acoustic signal (
Buzzer output
) for a successful measurement.