Page 25
FSC1/7 and FSC1000 Operation
FSC1/7, FSC1000
Then compare the result with the thickness value entered of
the adjustment foil used. If the comparison result reveals an
impermissible deviation, delete the support point and recreate
Fig. 21 Test result
Use the
Save Calibration Data
field to assign a
name to the adjustment data set. Then press
Save
.
Fig. 22 Name assignment for an adjustment
Once the submenu “Manage calibration” has been exited, the system will return to measuring mode. If the
adjustment was saved, it will be used for a subsequent measurement.
