MICRO-EPSILON ELTROTEC Endolight FOT Halogen 150, Instruction Manual

Page: 18 / 28

Page 18 ELTROTEC Endolight FOT Halogen 150
6. Instructions for Operation
6.1 General
Except the descriptive maintenance work (change of lamp, see Chap. 5.5 , fuse replacement, see Chap. 5.4 ,
voltage settings, see Chap. 5.3 ) no repairs or changes at the light source may be made, see Chap. 7. , see
Chap. 8. .
6.2 Cleaning
6.2.1 Housing and Power Supply
Turn off the ELTROTEC Endolight FOT Halogen 150 light source and disconnect the power supply cable
from the wall socket and from the rear side of the device.
Wipe the exterior surfaces using a damp cloth with mild soapy water.
Wipe the power supply cable using a damp cloth with mild soapy water.
6.2.2 Quartz Glass of Light Source
Remove any fingerprints using a cotton swab or isopropyl alcohol (rubbing alcohol).
NOTICE
Do not immerse
the device in water.
Do not connect the
device/power supply
cable if it is damp.
The light source
may get damaged or
destroyed.