MICRO-EPSILON ELTROTEC Endolight FOT Halogen 150, Instruction Manual

Page: 14 / 28

Page 14
Operation
ELTROTEC Endolight FOT Halogen 150
5.3 Adjust the Input Voltage 110 / 230 V
Unplug the power supply cable.
The factory setting of the voltage input is set on 230 VAC operating voltage. The positioning arrow points to
230 ( 2 ), see Fig. 4 .
To adjust the input voltage to 110 VAC, raise the voltage selector element at the designated cut, see Fig.
4 , see Fig. 5 , using a screw driver and pull it out.
2 3 1 4
1 Voltage selector element
2 Positioning arrow
3 Cut to raise the voltage selector element
4 Power supply cable connection
Fig. 4 Detail rear side of light source
Fig. 5 Raise the voltage selector element