MICRO-EPSILON ELTROTEC Endolight FOT Halogen 150, Instruction Manual

Page: 17 / 28

Page 17 ELTROTEC Endolight FOT Halogen 150
4 Lift the spring clip
Holder
5 Lamp socket
Insert the new lamp into the lamp socket and position them into the holder.
i
Make sure that the lamp coding is placed again in the designated cut.
Other settings are not required, as the holding system provides an optimum adjustment with a footprint up to
13 mm (maximum applicable fiber diameter).
Close the front door and mount it again with the screw, see Fig. 3 .
Plug in the power supply cable.