Page 14
Technical Data
thermoMETER CSmicro
Used pin
Function
SF02/SF15/M-3L/M-3H
2W/2W-SF15H/2W-SF22H/HS
OUT IN/ OUT
X
Input
Programmable functions:
- external emissivity adjust-
ment
- operating temperature
compensation
- triggered signal output and
peak hold function
5)
- Reset of hold function
6)
Programmable functions:
- triggered signal output and peak
hold function
5)
- Reset of hold function
7)
X
X
Serial digital
3)
uni- (burst mode) or bidirectional
Output impedances
min. 10 kΩ impedance
max. 1 kΩ loop impedance
Current draw
9 mA
4 - 20 mA
Power supply
5 ... 30 VDC
Status LED
Green LED with programmable functions:
- alarm display (threshold independent from alarm outputs)
- Automatic aiming support
- Self diagnostics
- Temperature code indication
Vcc adjust mode
- 10 adjustable emissivity and alarm values by variation of power
supply/ service mode for analog output (SF02/SF15 only)
1) 0 ... 4.6 V at power supply 5 VDC; also applies for alarm output
2) Only at power supply ≥ 11 V
3) Inverted RS232 signal, TTL, 9.6 kBaud
4) 500 mA if the mV output is not used
5) High level: > 0.8 V/Low level: < 0.8 V
6) Resetting peak or valley hold by high level on the IN/ OUT pin (low: open or GND / high: > 2.4 V ... 11 V)
7) Resetting of peak or valley hold by low level on the IN/ OUT pin (low: GND / high: open or > 1 V ... 11 V)
