Step 7: Condensate Connection -
Install the air conditioner.
Install AC-2122 straight fitting onto the AN833-8D bulkhead fitting that is attached to
the floor (remove the ‘B’ nut portion of the fitting).
Cut the vinyl condensate drain hose to length such that the end is pushed solidly onto the
AC-2122 fitting. A slight amount of lubricant will help. Safety wire the vinyl hose end
to the fitting. Note: For air conditional removal, simply loosen and disconnect the
fitting.
Step 8: Controller Location and Installation –
This step will be unique to every aircraft based on panel
availability. The key is to have plenty of controller cable
length. We recommend at least 20 (35 feet maximum) feet
as any shorter length may restrict your options.
Step 9: Ground Use Only -
Prepare two labels, one for the controller head and one to
be placed on the air conditioner adjacent to the connection
plug: “FOR GROUND USE ONLY”.
