Sweep System, Side Broom 203
Service Manual – SC8000
The
Right Side Scrub/Sweep Solenoid Valve
S8/L8
controls the side sweep motor(s).
S8/
L8
is located above the front end of the
Scrub Deck
.
Maintenance and Adjustments
Warning! Before performing any machine maintenance or adjustments, make sure the key
switch is off, the key is removed from the machine and the parking brake is engaged.
To Adjust the Side Broom Lift Actuator Motor
1. Assemble the jumper wire that you’ll
need to connect machine battery
to the three-wire connector on the
actuator. Refer to the adjacent
Jumper
Wire Assembly
Schematic
and
Bill of
Material
.
Important Service Note:
The power cord adapter (p/n
56407502), normally used on all
other two-wire actuator motors,
should not be used on the side
broom lift actuator motor.
The
Jumper Wire Assembly
Schematic
illustrates the correct battery polarity
(+ and -) power inputs to operate the
actuator motor for both extending and
retracting the drive nut.
Scrub
Deck
S8/L8
Jumper Wire Assembly Schematic
